Greco Systems' OmniDNC
joins the family of DNC hardware products bringing added capability to early CNC
controls. OmniDNC supports USB 2.0 to provide CNC flash memory at the control,
add critical long part program drip feed or add wired or wireless connection to a local area network. OmniDNC can be
configured to operate in or out of a DNC system, providing the benefits of
both standalone and DNC networking. Built-in the DNC hardware is communication
DNC software to transfer the part program to the CNC Control either to
memory or drip feed. If the
customer wishes to integrate OmniDNC with his network, client software to
enable PC access is provided with the product.
USB upgrade to your control
With the proliferation of USB
devices in the computer industry, Greco Systems introduces OmniDNC to bring advanced technology to early CNC machine tool controls.
OmniDNC is a DNC hardware device to transform your control to have
virtually unlimited memory capacity, add an FTP service or
adapt a secure wired or wireless DNC 802.11 a/b/g.
CNC Flash Memory
The USB 2.0 allows for a CNC
rugged and reliable data storage devices. Part programs are recorded
on the CNC flash drive and walked over to the machines requiring download.
Very long programs, greater than the memory capacity of the control, can
be executed directly off the CNC flash drive in tape or drip feed mode.
Part programs are spooled off the flash
drive and transmitted to the CNC control in real-time as the machine is
cutting the part.
Secure Wireless DNC to the
Marry your CNC Control to a
Wireless File Server by simply plugging in an external 802.11 Wireless to
USB 2.0 Adapter. This configuration gives you secure wireless DNC
without the need to purchase additional DNC software. All software to
administer and perform DNC functions is included if needed.
CNC FTP Service to the
While operating in a Wireless
or Wired DNC, OmniDNC can
provide CNC FTP service to your control, allowing the part program to be stored
to the local USB Flash Drive. Although there are several ways to
perform that transfer, including using Microsoft Windows file management
control, Greco Systems offers this capability for shops that are already
using CNC FTP in their DNC environment.
CNC Minifile, CNC Station
OmniDNC is compatible with
the CNC Minifile and CNC Station. The part program can be called
directly from the OmniDNC using the CNC Minifile or CNC Station and
transfered to the control via Behind the Tape Reader (BTR) interface.
This is an especially powerful add on device for machines requiring a
Paper Tape replacement application.